Installed the full version yesterday, running ok.
Woke this morning & app not reading anything.
Tried re installing but still nothing.
What can i do?
Help
-
TimHutchings
- Posts: 7
- Joined: Thu Apr 09, 2026 9:13 am
Re: Help
Unless your inverter has a fixed ip address, could be your router issued a new ip address. Either log on to your router and find the ip address for the inverter, or you could use the original GE app by going into settings, local monitoring and get the ip address that way.
Could be something else, but I'd check that out first.
Could be something else, but I'd check that out first.
-
smileymiley
- Posts: 2
- Joined: Thu Apr 09, 2026 9:21 am
Re: Help
Ok sorted.
The IP address on the router had a /24 at the end. Although it worked on this address at first the IP address on the giv app never showed it.
I put in the IP without /24 & all is well.
Many thanks
From a man with very little knowledge
The IP address on the router had a /24 at the end. Although it worked on this address at first the IP address on the giv app never showed it.
I put in the IP without /24 & all is well.
Many thanks
From a man with very little knowledge