GivEnergy Monitor for Android

Here the some screen pictures with the pause mode switched on via the portal and the two extra discharge slots shown but no extra charge slots. controls-IMG_9261.jpg controls-2-IMG_9260.jpg .

could my odd system be related to the pre-release inverter firmware D0.214-A0.214 that is loaded?

The ...

I had at look at the settings on remote control and there are two slots for the discharge, but only one slot for the charge. Pause battery is also there.

But only 'slot 1' for the discharge or charge slots is shown in the portal and GE App.

However the two discharge slots are shown in the inverter ...

for the 'inverter controls' the status box is:
AC3 3kw
extra controls No
dsp firmware 214
arm firmware 214
buzzer off
island on


However, if i change the pause setting via the portal/app an extra "Pause Mode " line appears at the bottom of the 'battery controls' status box. If i set back to non ...

The inverter app on my tablet has the controls like the "older systems" (no pause mode in the global settings) but through the givenergy app and the portal it has the added functionality of the pause mode and the multiple periods for charging- like the newer models. Both of these were not on my the ...

I don't think the AC3 has a "proper" pause mode.


Since Givenergy fitted a reconditioned inverter on 11th of dec 2025 (when the interference problem appeared), it possible there are some 'new' components in the ac3 inverter, which are not normally there, hence the pause mode. Alternatively its ...

That is what i did setting the pause mode via the portal (or givenergy app), the pause status flag appears in the battery status area in the inverter monitor app, the value (none, 1, 2 or 3) appearing is, as i said in prior message.

The ac3 inverter is causing some distortion of the 50 hz powerline ...

in inverter monitor, and under the status settings for the battery, i see that like you say pause mode=3, when the inverter is set to no discharge or charge in the givenergy app, so i would assume 0= no pause, 1=pause charge, 2=pause discharge, and 3= pause charge+discharge.

but the pause mode is ...

for my ignorance of the inverter monitor app, but i don't see any "Global Settings" items in the app, only the 8 other settings between "number of inverters" to "grid count"

I have been having a problem charging my EV, since the inverter, when not set to "pause charge and and discharge" sends out some kind on powerline interference to the car which continually stops and starts the charging. Setting pause via the givenergy app or portal makes EV charging work just fine ...